skip to Main Content

110 Series

$0.00

Rectangle Folding Table

  • Adjustable from 23-30”h or 29- 36”h
  • Unobstructed movement around table perimeter
  • Wide, arch base- pedestal legs
  • Fully assembled- Just unfold for use
  • ¾” top available in HPL or TFL laminates
  • Customizable finishes
Clear
SKU: N/A Category: Tag:

Product Details

The 110 Series Table is fully assembled, adjustable height folding table designed to allow unobstructed movement around the table. Customize your table by selecting either HPL or TFL laminate. For HPL, core options are ¾” particleboard or ¾” plywood; HPL top underside sealed with moisture resistant backer. TFL top has thermally fused laminate (TFL) on both sides top and bottom. Both HPL and TFL tops finish with T-mold or 3mm protective edging. The top is supported with a strong, rigid 2 ¼” 18 gauge roll formed edge steel apron. The adjustable pedestal leg design is arched with wide support base to distribute table weight evenly. Adjustability has two ranges, standard 23-30”h or 29-36”h, that adjust in 1” increments. Each leg consists of 1 ¼” rd 16 gauge and 18 gauge steel and two compression locks securing open position. Adjustable levelers ensure proper positioning and alignment on uneven floors. Barricks stocks 30 HPL and 16 TFL options to create your customized design.


110 Series- Adj Ht- 23-30”h / 29-36”h*

HPL Top Particleboard Core

Size T-Mold Model # 3mm Model # Weight
18×60 110-1860-PT 110-1860-PM TBD
18×72 110-1872-PT 110-1872-PM TBD
18×96 110-1896-PT 110-1896-PM TBD
24×60 110-2460-PT 110-2460-PM TBD
24×72 110-2472-PT 110-2472-PM TBD
24×96 110-2496-PT 110-2496-PM TBD
30×60 110-3060-PT 110-3060-PM TBD
30×72 110-3072-PT 110-3072-PM TBD
30×96 110-3096-PT 110-3096-PM TBD
36×72 110-3672-PT 110-3672-PM TBD
36×96 110-3696-PT 110-3696-PM TBD

HPL Top Plywood Core

Size T-Mold Model # 3mm Model # Weight
18×60 110-1860-WT 110-1860-WM TBD
18×72 110-1872-WT 110-1872-WM TBD
18×96 110-1896-WT 110-1896-WM TBD
24×60 110-2460-WT 110-2460-WM TBD
24×72 110-2472-WT 110-2472-WM TBD
24×96 110-2496-WT 110-2496-WM TBD
30×60 110-3060-WT 110-3060-WM TBD
30×72 110-3072-WT 110-3072-WM TBD
30×96 110-3096-WT 110-3096-WM TBD
36×72 110-3672-WT 110-3672-WM TBD
36×96 110-3696-WT 110-3696-WM TBD

TFL Top Particleboard Core

Size T-Mold Model # 3mm Model # Weight
18×60 110-1860-TT 110-1860-TM TBD
18×72 110-1872-TT 110-1872-TM TBD
18×96 110-1896-TT 110-1896-TM TBD
24×60 110-2460-TT 110-2460-TM TBD
24×72 110-2472-TT 110-2472-TM TBD
24×96 110-2496-TT 110-2496-TM TBD
30×60 110-3060-TT 110-3060-TM TBD
30×72 110-3072-TT 110-3072-TM TBD
30×96 110-3096-TT 110-3096-TM TBD
36×72 110-3672-TT 110-3672-TM TBD
36×96 110-3696-TT 110-3696-TM TBD

* For extended height table, add EH to end of part number; ie- 110-1860-PT-EH

Features & Options

Strong Rigid Apron

Strong, Rigid Apron

18 gauge 2 1⁄4” h steel apron with rolled bottom edge for added strength, attached with coarse, deep threaded screws designed specifically for particleboard and plywood.

T mold Edge Rounded Corner

T-mold Edge
Rounded Corners

Rounded plastic molding secures to top’s edge using friction barb; provides impact protection to sides. T-mold edged tables have rounded corners.

mm Edge Square Corner

3mm Edge
Square Corners

3mm (1/8”) thick flat plastic edging machine glued, sealing edge; provides impact protection to top’s sides. 3mm edged tables have square corners.

Compression Lock Safari

Compression Lock

Compression lock secures table leg in locked open position. Each leg has two compression locks, connecting cross bracing and locking bar.

Adj Leg Series

Adjustable Leg

Adjustable leg uses a spring mechanism that when pressed to retract allows leg to be adjusted in 1” increments.

Adj leveler

Adjustable Levelers

Adjustable levelers provide stability on uneven floors and ensure proper height positioning to adjoining tables.

Options:

Specification & Materials

Top:

HPL Particle Board Core- 3/4″ particleboard core with high pressure laminate (HPL) top surface, moisture resistant backer bottom surface finished with a protective edge option- t-mold or 3mm.

HPL Plywood Core- 3/4″ plywood core with high pressure laminate (HPL) top surface, moisture resistant backer bottom surface finished with a protective edge option- t-mold or 3mm.

TFL- 3/4″ particleboard core, thermally fused laminate (TFL) on top and bottom surface finished with a protective edge option- t-mold or 3mm.

Edging: 

T-mold- an extruded plastic edging in the shape of a “T”. The stem part is barbed and inserted into a slot in the core board. The friction barbs prevent the t-mold from coming out of the core. T-mold external surface is slightly rounded and provides protection against impacts to side. T-mold is an economical edge.

3mm- an extruded 3mm (1/8”) plastic that is machine glued to panel sides sealing edge, then machine trimmed to fit panel thickness. Edging provides protection against impact to sides. 3mm corners are square and more expensive than using T-mold.

Apron:

Strong, rigid 2 1/4″ 18 gauge steel with rolled bottom edge for added strength attached with coarse, deep threaded screws designed specifically for particleboard and plywood.

Legs:

Adjustable pedestal leg allows table height to be changed in 1″ increments;  two ranges, standard 23-30″h or extended 29″-36″h. Leg design allows unobstructed movement around table perimeter.  Arched, wide support base distributes table weight evenly. Leg consists of a combination of 1 1/8″ and 1 1/4″ rd 16 gauge and 18 gauge steel.  Each leg has two compression locks securing open position. Adjustable levelers ensure proper positioning and alignment on uneven floors.

Color Selections - In Stock Options

HPL Selections- Particleboard/ Plywood

Fusion Maple
Quartered Oak
Nepal Teak
River Cherry
Montana Walnut
Wild Cherry
Hunter Green
Cafelle
Marigold
Fonthill Pear
Solar Oak
Studio Teak
English Oak
Bullseye Red
Graphite Nebula
Cocobala
Manitoba Maple
Asian Sand
Dove Grey
Grey Nebula
Shaker Cherry
Biltmore Cherry
Empire Mahogany
Black
Designer White
Pewter Brush
Skyline Walnut
Persian Blue
Windsor Mahogany
Figured Mahogany
Custom
Wilsonart
Selections

TFL Selections- Particleboard

Hardrock Maple
Glacier
Quartered Oak
Ash
Truffle
Montana Walnut
Empire Mahogany
Cafelle
Fonthill Pear
Wild Cherry
Solar Oak
Biltmore Cherry
Windsor Mahogany
Shaker Cherry
Cocobala
Volunteer Walnut

Paint Selections - Apron/ Leg/ Lock

Black
Brown
Tan
Grey
Charcoal
Platinum
Metallic Silver
Putty

T-mold Edge (Table will have rounded corners)

Fusion Maple
Quartered Oak
Wild Cherry
Biltmore Cherry*
Windsor Mahogany*
Figured Mahogany
Brown
Cafelle*
Maple*
Fonthill Pear*
Solar Oak*
Truffle*
Montana Walnut
Cocobala*
Glacier*
Putty
Dove Grey
Ash*
Shaker Cherry*
Empire Mahogany
Black

* Indicates edge is available only in ¾”.

3mm Edge (Table will have square corners)

Fusion Maple
Wild Cherry
Biltmore Cherry
Windsor Mahogany
Figured Mahogany
Brown
Designer White
Asian Sand
Studio Teak
English Oak
Cafelle
Maple
Fonthill Pear
Solar Oak
Truffle
Montana Walnut
Graphite Nebula
Cocobala
Grey Nebula
Nepal Teak
Skyline Walnut
Pewter Brush
Glacier
Putty
Dove Grey
Ash
Shaker Cherry
Empire Mahogany
Black
River Cherry
Quartered Oak

Wilsonart - Custom Order Laminates

Contact Sales/ Customer Service for selection of Wilsonart alternatives.

sales@barricks.net

1-800-404-6843

Assembly

No assembly required for this table. Just remove from box, unfold legs, and use.

Cut Sheet

110 Series Cut Sheet

Back To Top