skip to Main Content

Features

Tops

T-mold Edge Top Rounded Corners

T mold Edge Rounded Corner

Rounded plastic molding secured to top’s edge using friction barb; provides impact protection to sides. T-mold edged tables have rounded corners.

T mold Edge Rounded Corner

Cross section of laminate with T-mold.

3mm Edge Top Square Corners

3mm Edge Square Corner

Flat, 3mm (1/8”) thick plastic edging machine glued, sealing edge; provides impact protection to top’s sides. 3mm edged tables have square corners.

3mm Edge Square Corner

Cross section of laminate w 3mm edge.

Apron

Folding Leg

Strong Rigid Apron

Folding Leg Apron:

18 gauge 2¼” h steel apron with rolled bottom edge for added strength, attached with coarse, deep threaded screws designed specifically for particleboard and plywood.

Fixed Leg

Leg Bracket Attachment Reg UT

Apron corner with bracket:

Fixed leg apron showing corner with bracket, bolted leg attached. Apron is 18 gauge 2¼” h steel apron with rolled bottom edge for added strength, attached with coarse, deep threaded screws designed specifically for particleboard and plywood.

Table Legs

Pedestal Leg

Pedestal Leg Series

Pedestal leg design allows unobstructed movement around table perimeter.  Arched, wide support base distributes table weight evenly.  Leg consists of a combination of 1 ¼” rd 16 gauge and 18 gauge steel.  Each leg has two compression locks securing open position.  Adjustable levelers ensure proper positioning and alignment on uneven floors.

Wishbone Leg

Wishbone Leg Series

Wishbone legs have a wide base providing stability while accommodating seating and unobstructed movement around entire table perimeter.  Legs are positioned within steel apron.  Leg is 1 ¼” rd 16 gauge steel with supporting crossbar. Each leg has two compression locks securing open position.  Adjustable levelers ensure proper height positioning and alignment on uneven floors.

Cross H Leg

Cross H Leg Series

Cross H consists of 1” sq 18 gauge steel connected to opposite side leg with 1” sq 18 gauge steel cross bar.  Cross bar between legs provides extra stability.  Leg position easily accommodates end of table seating.  Each leg has two compression locks securing open position.  Adjustable levelers ensure proper height positioning and alignment on uneven floors.

Classic Leg

Classic Leg Classic

The Classic table legs and apron are integrated into a single frame component.  Legs are 1″ sq 18 gauge steel welded to apron and 1” x 2” 18 gauge steel cross bar connecting to adjacent end leg reinforcing leg stability. Each leg set has two compression locks. Positioning of leg accommodates end seating. Adjustable levelers ensure proper positioning and alignment on uneven floors.

Adjustable Height

Adjustable Height Leg

Designated tables are height adjustable.  Generally tables adjust from 23”-30”h standard, or extended 29”-36”h.  The following tables are height adjustable:

110 Series, Symposium Adjustable, Activity Rectangle, Activity Square, Activity Trapezoid, Activity Half Round, Activity Kidney, 4600 Series, Flexible Solutions Corner, Flexible Solutions Rectangle

Spring Mechanism on Adjustable Tables

Height Adj CRT

Spring locking mechanism allows table height to be changed in 1” increments.  Two ranges available, standard 23”-30”h on extended 29”-36”h.

Adjustable Levelers

Adj leveler

Adjustable levelers provide stability on uneven floors and ensure proper height positioning to adjoining tables.

Activity Table Leg Plate

Adj w Allen Key Activity Table

Activity legs have upper and lower section. The upper section is 1 ¼” rd 18 gauge steel welded to mounting plate.  Lower section is 1 ⅛” rd 16 gauge chrome tapered leg with swivel non-marring glides.  Leg adjusts in 1” increments, 23-30”h using allen key.

Locking Systems

Compression Lock

Compression Lock Safari

Compression lock secures table leg in locked open position. Each leg has two compression locks, connecting cross bracing and locking bar.

Deluxe Track Lock

Deluxe Track Lock System w Sure Lock Safety Lathc series

Deluxe Locking System with Sure-Lock safety latch require lock release trigger to be activated twice for leg to fold.

Vanguard Lock

Vanguard Locking Systmen w Sure Catch Series

Vanguard Locking System with Sure-Catch safety latch is a Barricks patented mechanism.  This locking system is the most substantial, heavy duty locking system offered by Barricks. The track system with release trigger needs to be activated twice for safety to fold legs.

Other

Casters Option

Vanguard Locking Systmen w Sure Catch Series

Barricks has two caster options-2” Hooded Caster and 3” Heavy Duty Caster. When ordered, (2) casters with brake and (2) casters without brakes are provided.

Key Lock on Flip Top

Vanguard Locking Systmen w Sure Catch Series

To secure access, lock can be added; specify key same or key different.  Master keys are available.  There is an added cost for adding this option.

Cafeteria Cantilevered Brace

Cantilever Bases

Cantilevered braces are used to provide additional support to top and benches and for lateral stability.

Bench Cantilevered Support

Compression Lock w Cantilevered Bracing Bench

Cantilevered braces are used to provide additional support to bench top and for lateral stability.

Back To Top