Quest Series

Specification & Materials

Top:

HPL Particle Board Core- 3/4″ th particleboard core with high pressure laminate (HPL) top surface, moisture resistant backer bottom surface finished with a protective edge option- t-mold or 3mm.

HPL Plywood Core- 3/4″ plywood core with high pressure laminate (HPL) top surface, moisture resistant backer bottom surface finished with a protective edge option- t-mold or 3mm.

TFL– 3/4″ th particleboard core, thermally fused laminate (TFL) on top and bottom surface finished with a protective edge option- t-mold or 3mm.

Edging:

T-mold- an extruded plastic edging in the shape of a “T”. The stem part is barbed and inserted into a slot in the core board. The friction barbs prevent the t-mold from coming out of the core. T-mold external surface is slightly rounded and provides protection against impacts to side. T-mold is an economical edge.

3mm- an extruded 3mm (1/8”) plastic that is machine glued to panel sides sealing edge, than machine trimmed to fit panel thickness. Edging provides protection against impact to sides. 3mm corners are square and more expensive than using T-mold.

Apron:

Strong, rigid 2 1/4″ 18 gauge steel with rolled bottom edge for added strength attached with coarse, deep threaded screws designed specifically for particleboard and plywood.

For tables over 72″, a 5″ wide “V” channel 20 gauge steel stretcher bar secured to top underside for additional rigidity and strength.

Legs:

The Double C style leg constructed with a 1 ¼” 18 gauge steel base welded to two 1 ¼” 18 gauge upright supports welded to 1 ¼” upper horizontal bar which attaches to the table underside. Legs lock in open position with Barricks’ patented Deluxe Track Locking system with Sure-Lock Safety Latch. Adjustable levelers ensure proper positioning and alignment on uneven floors; casters easily added for mobility.